Unpack The (Optional) Disk-Array Enclosures; 15-Drive Dae Container Contents; Unpack The (Optional) Disk-Array; Enclosures - Dell EMC Unity 480/F Installation And Service Manual

Unpack the (optional) disk-array enclosures

15-drive DAE container contents

Verifying shipping package contents
In the Management IPv4 Address and Management IPv6 Address
l
sections, select the options you want, specify relevant information, and then
click Next.
4. Review the configuration information, and then do the following based on the
mode you selected:
For Auto Discover mode, click Start to apply the configuration on the
l
storage system.
For Manual Configuration mode:
l
a. Click Save to USB drive. Ensure that you save the configuration file to
the root directory level of the USB drive.
b. Click Next to identify the location of the port on your storage system.
c. Insert the USB drive into one of the available USB ports on either SP.
The storage system will automatically detect the USB drive and apply the
network connection information. This process may take up to 10 minutes.
When successfully completed, a response file (iw_resp.txt) is written back
to the USB drive.
5. Click Finish.
6. Confirm that the SP Fault LED is solid blue, which indicates that the system's IP
address has been set.
After you finish
In a web browser, access Unisphere by specifying the URL: http://<ip_address>/.
Where, <ip_address> is the IP address you set for the storage system.
Note
Refer to the Configuration Worksheet for information on the user credentials you must
use the first time you log on.
The Initial Configuration Wizard launches the first time you access Unisphere. Refer to
the Configuration Worksheet and Unisphere Online Help for more information on
configuring and start using your system.
Disk-array enclosures (DAEs) provide additional storage. The types of DAEs available
are:
3U 15 disk 3.5" drive DAE
l
2U 25 disk 2.5" drive DAE
l
DAEs are optional. If you have one or more DAEs in the system, verify that you have
received all of the DAE components, including cables, bezel, rail kit, and mounting
screws.
Confirm that you received all necessary equipment needed to install the new 15-drive
DAE.
Verify that you received the following:
Unpack the (optional) disk-array enclosures
Installation Procedures
25