Hardware Terms; Release Information; Before You Begin; Installation Workflow Including Optional Daes - Dell EMC Unity 480/F Installation And Service Manual

Installation Procedures

Hardware terms

Release information

Before you begin

Installation workflow including optional DAEs

Unity 480/F, Unity 680/F, Unity 880/F Installation and Service Guide
10
Procedure
1. Set up a product support account.
If you do not already have a product support account, go to
support.emc.com/products/39949
account to access the latest troubleshooting information, online chat,
installation and maintenance videos, utilities and wizards.
2. Complete the Configuration Worksheet .
The Configuration Worksheet is available for download from
support.emc.com/products/39949. Configuration worksheet information is also
included in Configuration Worksheet
Use the following documents and software and sequence of actions as a guide to
install the storage system:
1. Use the Quick Start Guide or this guide and the Unity Hardware Information Guide
to:
a. Prepare the site for installation.
b. Unpack the storage system.
c. Rack and install the storage system.
d. Cable the system components.
e. Power up the system components.
f. Use the Connection Utility (CU) to discover and configure the system
management IP address for network management.
g. Launch a browser, log in to the system, and follow the Unisphere Initial
Configuration Wizard tasks to complete the initial system configuration.
2. Use Unisphere to:
a. Complete the Initial Configuration Wizard tasks:
Accept License Agreement and Configure User Credentials
l
Install License File
l
Configure Network Services (DNS/NTP)
l
Configure FAST Cache and Pools (optional)
l
Configure Alerts (optional)
l
to set one up. You will need a support
https://
on page 117.
https://