Install A New Fan Module; Install The Top Cover On The Sp Assembly - Dell EMC Unity 480/F Installation And Service Manual

Service Procedures

Install a new fan module

Install the top cover on the SP assembly

Unity 480/F, Unity 680/F, Unity 880/F Installation and Service Guide
84
Figure 77 Removing the fan from the motherboard
Procedure
1. Place the fan module into the mounting position in the SP assembly.
2. Squeeze the blue tabs and press downward to lock the fan module into position.
3. Connect the fan module power cable to the connector on the motherboard.
Figure 78 Installing the fan module
Procedure
1. Position the top cover over the SP assembly and align it with the slots in the
sides at the rear of the SP assembly.