Do not let water get into the
Steam from a steam cleaning ap-
pliance could reach the electrical
components and cause a short cir-
Do not use a steam cleaner!
The data plate located inside the ap-
pliance must not be removed. It con-
tains information which is required in
the event of a service call.
To avoid damaging the surfaces of your
appliance, do not use:
– cleaning agents containing soda, am-
monia, acids or chlorides
– cleaning agents containing descaling
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
– solvent-based cleaning agents
– stainless steel cleaning agents
– dishwasher cleaner
– oven sprays
– glass cleaning agents
– hard, abrasive sponges and brushes,
e.g. pot scourers
– melamine eraser blocks
– sharp metal scrapers.
Cleaning and conditioning agents
used inside the appliance must be
Cleaning and care
We recommend using lukewarm water
with a little washing-up liquid to clean
surfaces of the appliance.
The following pages contain import-
ant information on cleaning.
Preparing the appliance for
Switch the appliance off.
The display goes out and cooling is
If this does not happen, then the safety
lock is still activated (see "Selecting fur-
ther settings - Activating or deactivating
the safety lock").
Disconnect it from the mains.
Take any food out of the appliance
and store it in a cool place.
Defrost the freezer (see "Defrosting").
Take out all other removable parts for
Remove the drawers.
Remove the shelves: lift them up at
the front slightly and then pull them
forwards and out.
The side trim on the shelves is not