Installing and removing
4.1 Installing the 3RW5 communication module in the 3RW5 soft starter
4.1.1
Break out the cover of the slot
Requirements
● Sharp, robust knife or diagonal cutter
Procedure
Sharp edges.
Risk of injury from sharp edges or burrs.
Make sure that there are no sharp-edged burrs on the connecting webs and the preset
breaking points after knocking out. If necessary, deburr these spots professionally to avoid
injury.
NOTICE
Damage to property
Hold the cover tight so that it does not fall into the interior.
Ensure that no further foreign matter can get into the slot.
30
CAUTION
SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001