Tcp/Ip Interface Object - Siemens SIRIUS 3RW5 Manual

Appendix
A.10 TCP/IP Interface Object
A.10

TCP/IP Interface Object

The "TCP/IP Interface" object provides the mechanism for configuring the TCP/IP network
interface of the EtherNet/IP device. The configurable elements include the IP parameters of
the EtherNet/IP device for example.
The following information applies to the TCP/IP Interface Object of the
3RW5 EtherNet/IP communication module:
● Class code: 0xF5
● Class attributes: 1 ... 3
● Number of instances: 1
The definition of the instance attributes corresponds to the CIP specification, Volume 2. All of
the instances defined there as "required" are supported.
General services
Service code Available service
Class
0x01 Yes
0x0E Yes
0x10 No
Class attributes
Attribute ID
1
2
3
104
Service
Instance
Yes Get_Attributes_All
Yes Get_Attributes_Single
Yes Set_Attributes_Single
Access
Get
Get
Get
Description
Supplies the contents of all attributes.
Supplies the contents of one attribute.
Changes the contents of an attribute.
Class attribute
Revision
Max Instance
Number of Instance
SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001
Data type
UINT
UINT
UINT