Mount The 3Rw5 Communication Module In The Slot Of The 3Rw5 Soft Starter - Siemens SIRIUS 3RW5 Manual

Installing and removing
4.1 Installing the 3RW5 communication module in the 3RW5 soft starter
4.1.2

Mount the 3RW5 communication module in the slot of the 3RW5 Soft Starter

Requirements
● Screwdriver PH1
Note
A magnetic screwdriver simplifies assembly.
Procedure
Illustration similar
1. Push the 3RW5 communication module into the slot.
2. Secure the 3RW5 communication module with the fastening screws supplied at the lower
and upper mounting holes.
Result
You have mounted the 3RW5 communication module in the 3RW5 soft starter, which you
can connect to the fieldbus (Page 35) via the 3RW5 communication module.
32
SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001