Siemens SIRIUS 3RW5 Manual page 106

Soft starters and solid-state switching devices, ethernet/ip communication module
Hide thumbs Also See for SIRIUS 3RW5:
Table of Contents

Advertisement

Appendix
A.10 TCP/IP Interface Object
The following table describes the attribute ID 1 "Status":
Bit
Query
0 ... 3
Interface Configuration Status
4
Mcast Pending
5
Interface Configuration Pending
6
AcdStatus
7
AcdFault
8
IANA Port Admin Change Pending
9
IANA Protocol Admin Change Pending
10 ... 31 Reserved
106
Definition
Indicates the status of the characteristic of the interface
configuration:
0 = The characteristic of the interface configuration was not
configured.
1 = The characteristic of the interface configuration contains a
configuration by a BOOTP server, DHCP server or a non-volatile
memory.
2 = The IP address, as part of the characteristic of the interface
configuration, is set on the hardware (e.g. setting wheel).
0 = A change of the following configuration is not impending: TTL
value and/or characteristic of the Mcast Config.
1 = A change of the following configuration is impending: TTL value
and/or characteristic of the Mcast Config. The change is accepted on
the next restart.
0 = A change of the following configuration is not impending:
Characteristic of the interface configuration.
1 = A change of the following configuration is impending:
Characteristic of the interface configuration. The device has to be
restarted to accept the change.
0 = ACD has not detected an IP address conflict.
1 = ACD has detected an IP address conflict. For this purpose, ACD
must be supported and activated by the device.
0 = ACD has not detected an IP address conflict.
1 = ACD has detected an IP address conflict. Because of the
conflict, the current interface configuration cannot be used.
0 = A change of the following configuration is not impending:
Characteristic of the IANA Port management.
1 = A change of the following configuration is impending:
Characteristic of the IANA Port management. The device has to be
restarted to accept the change.
0 = A change of the following configuration is not impending:
Characteristic of the IANA Protocol management.
1 = A change of the following configuration is impending:
Characteristic of the IANA Protocol management. The device has to
be restarted to accept the change.
0
SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents