Softune Workbench Getting Started; Copying The "Template" Directory; Adjusting The Project Files - Fujitsu MB91460 Getting Started

6 Softune Workbench Getting Started

PREPARING A NEW PROJECT

6.1 Copying the "template" directory

If you want to create a new project it is strongly recommended to use the "template project"
as a base of operations.
The "template project" includes all basic settings for a quick and safe start. It includes the
header and includes files of the latest released version.
To start, copy the "template" directory with all its sub folders.
For example, we want to create a project, called LED. For that, rename the copy of the
"template" folder to "LED".

6.2 Adjusting the project files

First click into the new "LED" folder and rename the following files:
→
Template.prj
→
Template.wsp
Now open the file "Led.prj" with your favourite text editor.
You will find an entry like this:
[DirInfo]
PRJ=C:\
In the line "PRJ=" please edit the file path to your correct path. Of course, the "template" has
to be renamed to "led".
Save and close the file. Attention: If you use MS Word, please be sure to save the file as a
normal text file, not as a word document!
© Fujitsu Microelectronics Europe GmbH
Getting Started
Chapter 6 Softune Workbench Getting Started
Figure 15: Copy the Template Project
Led.prj
Led.wsp
- 27 - MCU-AN-391005-E-V17