Fujitsu MB91460 Getting Started page 29

Then the following project structure will be displayed on the left side of the Softune screen.
The code only contains the chip specific header inclusion and in the main routine a frame for
the interrupt initialisation.
© Fujitsu Microelectronics Europe GmbH
Getting Started
Chapter 6 Softune Workbench Getting Started
The top level is the Workspace itself: "Led".
The next level contains the ABS-File of the Project, which
contains the compiled program data
The source files, their dependencies and the debugger
settings follow.
For the moment the Source Files are in the point of interest.
Open the Source File of the Main Program "Main.c" by double
clicking it in the window shown left.
Now a text editor window will open, which shows the contents
of "Main.c". It will look like this:
Figure 17: The MAIN.C Code of the Template
- 29 - MCU-AN-391005-E-V17