Residual discharge head of concentric pipes 0.85 m
Residual discharge head of separate pipes 0.5 m
Residual discharge head of boiler without pipes
Concentric flue gas outlet pipes
Diameter
Maximum length
Losses for a 45°/90° bend
Hole in wall (diameter)
Concentric flue gas outlet pipes
Diameter
Maximum length
Losses for a 45°/90° bend
Hole in wall (diameter)
Twin flue gas outlet pipes
Diameter
Maximum length
Losses for a 45°/90° bend
Nox
Emission values at maximum and minimum output (**)
Maximum
CO s.a. less than
CO
(***
see below
2
NOx s.a. lower than
T flue gases
Minimum
CO s.a. less than
CO
(***
see below
2
NOx s.a. lower than
T flue gases
(*) Average value between various hot water operation conditions.
(**) check performed with concentric pipe Ø 60-100, length 0.85 m. - water temperature 80-60°C.
CO
tolerance = + 0.6% - 1.0%.
2
(***)
The data indicated must not be used to certify the system; for certification, use the data indicated in the "System handbook" measured during first ignition.