Advertisement
4.1
Access to the technical parameters
Through the REC10 (controller) it is possible to access, using the
TECHNICAL menu, a series of parameters that can be programmed to
allow you to personalise the operation of the boiler:
FRI
18/05/2013
MENU
INFO
HOT WATER TEMPERATURE
- Keep the keys
and
password menu (about 5 sec)
FRI
18/11/2013
SELECT OPTION
- Using the keys
and
access the INSTALLER or SERVICE authorisation level, depending on
the level of the tree menu, then press the key
5
INSERT PASSWORD
-
-
-
-
- select TECHNICAL with the keys
selection with the key
SELECT OPTION
- Access the desired menu and change/view the parameter concerned
(see the menu tree on page 8).
It is possible to return to the start page at any time by keeping the key
"back" pressed for at least 2 seconds.
PLANT
12:17
1.3 bar
STATE
30
°C
.3
SET
pressed at the same time to enter the
MENU
12:17
SETTINGS
select the value of the password to
00
and
, confirming the
MENU
SETTINGS
TECHNICAL
5.1
ENGLISH
13
Advertisement
