Network Interface Parameters - Carrier AquaForce 30XV140 Controls, Start-Up, Operation, Service And Troubleshooting Instructions

APPENDIX H — TOUCH PILOT
The Touch Pilot control can be ac-
Web Interface —
cessed via a web browser. The layout of the web interface is
similar to the Touch Pilot control interface. Connection is from
a PC using a web browser with Java installed.
Only two web connections may be authorized at the same
time. The two users can be connected simultaneously with no
priority between them. The last modification is taken into
account.
IMPORTANT: Use firewalls and VPN for a secure
connection.
MINIMUM WEB BROWSER CONFIGURATION
• Internet Explorer (version 8 or higher) or Mozilla Firefox
(version 26 or higher). In the browser's connection
options add the unit IP address to the exceptions list. Do
not use a proxy server.
• Java platform (version 6 or higher). In the control panel,
clear the Keep temporary files on my computer checkbox
and use a direct connection.
For more information about web browser configuration, see
the section Web Connection Settings on page 163.
WEB INTERFACE ACCESS — By default, web interface
access is disabled (see Fig. A and B). To enable web interface
access, navigate Main Menu  Configuration Menu  Ser-
vice Parameters  HTTP Server. Select Enable and save. Con-
trol power must be cycled for the enable web interface change
to take effect. To access the Touch Pilot control, enter the IP ad-
dress of the unit in the address bar of the web browser (Fig. C).
The default IP address is 169.254.0.1. For information on how
to set the controller IP address, see Web Connection Settings
section on page 163.
Fig. A — Default with Access Disabled
Fig. B — Enable Web Interface Access
™
WEB AND NETWORK INTERFACE PARAMETERS
Fig. C — IP Address in Web Browser
TECHNICAL DOCUMENTATION — When the Touch Pi-
lot control is used via a PC web browser, the user can access
the technical documentation for the product.
Select the Technical document button
of documents related to the unit and its components. Technical
documentation includes the following documents:
• Spare parts documentation — The list of spare parts
included in the unit with reference, description and drafting.
• Misc — Documents such as electrical plans, dimension
plans, unit certificates.
• PED — Pressure Equipment Directive.
• IOM — Installation, operation and maintenance manual,
controls installation/maintenance manual.
Touch Pilot Interface Parameters —
Pilot screen can be customized with additional parameters for
connectivity and display.
Only parameters specified in this section can be changed
by the user. Do not modify any other parameters. Changing
other parameters may result in losing some of the features
of the touch screen, or the screen may stop working. If in
doubt, do not change anything; contact Carrier service.
SETUP MENU — The Setup Menu allows users to modify
settings such as network information, web connections, and
display settings. The Setup menu can be accessed at any time
via the Touch Pilot interface. To access the Setup Menu, press
anywhere on the Main Menu screen (excluding buttons or text
fields) and hold for about 4 seconds. By default, the Setup
Menu is not password-protected. (For more information about
Setup Menu password settings, see page 165.) See Fig. D.
162
IP ADDRESS
CAUTION
to access a list
The Touch