Carrier AquaForce 30XV140 Controls, Start-Up, Operation, Service And Troubleshooting Instructions page 167

APPENDIX H — TOUCH PILOT
If the responses are positive (see Fig. P), the web browser
configuration may be faulty. Check the system parameters to
determine if a proxy server or an automatic configuration script
has been configured.
Proxy Server and Automatic Configuration Script — To
check these parameters in a modern web browser (for example,
Internet Explorer version 8 or higher), follow these steps:
1. Click the web browser Tools button and select Internet
Options from the drop-down menu. The Internet Options
dialog box opens.
2. Click the Connections tab, and click LAN settings on the
Connections tabbed page. The Local Area Network
(LAN) Settings dialog is displayed (Fig. R).
LEGEND
1 — Automatic configuration script
2 — Proxy server
3 — Advanced proxy configuration
Fig. R — Local Area Network Settings
3. Clear the Use automatic configuration script checkbox.
4. If a proxy server is used, add the unit IP address to the
Exceptions list of the proxy server (click Advanced Proxy
Configuration). See Fig. S.
Fig. S — Proxy Settings
5. Click OK to save or Cancel to discard changes.
NOTE: For web browsers other than Internet Explorer, refer to
the browser Help files for information on verifying system
parameters.
™
WEB AND NETWORK INTERFACE PARAMETERS (cont)
Negative Response — If the response to the ping command is
negative, verify the IP address of the PC and the IP address of
the unit. They must have the system and sub-system in com-
mon. For example: Unit address: 172.30.101.11 and PC
address: 172.30.101.182. In this example 172.30 corresponds
to the network, and 101 corresponds to the sub-system.
be unique on the sub-system.
Ethernet Connection — To check the Ethernet connection on
the PC, open the Control Panel and navigate to Network Con-
nections. Find the system interface board and confirm that
there is no red "X" on the icon.
in the connected status. If the problem continues to occur, veri-
fy connections and if necessary repair the network connection.
Javanet Connection — To configure proxy settings for Java,
follow these steps:
NOTE: If Java is not installed, a free download is available at
http://www.java.com. If the Java application is installed and
1
used by other applications, check their compatibility with the
following configuration.
2
3
a19-2174
ADD UNIT
IP ADDRESS
a30-5896
167
The last part of the IP address is the host number and must
The connection to the local network must be authorized and
1. Open the PC Control Panel and select Programs.
2. In the Programs window, click the Java application icon
. The Java Control Panel is displayed (Fig. T).
Fig. T — Java Control Panel
3. Click Network Settings on the General tabbed page. The
Network Settings dialog box opens (Fig. U).
Fig. U — Java Network Settings