Touch Pilot Login And Display Setup; Main Menu Screen; Home Screen - Carrier AquaForce 30XV140 Controls, Start-Up, Operation, Service And Troubleshooting Instructions

TOUCH PILOT LOGIN AND DISPLAY SETUP —
™
Certain control functions and navigation menus are password
protected. There are multiple levels of user access on the
Touch Pilot display, each with independent password protec-
tion:
• Basic — At initial start-up and after a timeout period, the
access type defaults to All. In this mode the user can view
system operating conditions, and select the set point only.
• User — The User access level authorizes access to mod-
ify the Setpoint Table and some Configuration Menu
parameters, as well as access to all menus accessible
with the Basic mode. The default password for User
level access is 11. To change the User access password,
go to Main Menu  Configuration Menu  User Con-
figuration, then enter the new password and press the
Save button.
• Service — The Service access level authorizes access to
all menus and parameters needed for operation and service
of the machine, including Quick Test and Maintenance
Menus as well as additional Configuration Menus. The
default password for Service level access is 88. To change
the Service access password, go to Main Menu  Config-
uration Menu  Service Parameters, then scroll to the
password entry area. Enter the new password and press the
Save button.
• Factory — The Factory access level authorizes access to
all menus and parameters for the unit, including factory
settings. The default password for Factory level access is
113. To change the Factory access password, go to Main
Menu  Configuration Menu  Factory Menu, then
scroll to the password entry area. Enter the new pass-
word and press the Save button.
To log in to the Touch Pilot display, press the Login button
on the Main Menu or the Home screen and input the
required password on the User Login screen. Then press the
Login button on the User Login screen. See Fig. 4.
30 592
4
2
3
LEGEND
1 — Arrows indicate selected language
2 — Login button (confirm changes)
3 — Logout button (cancel changes)
4 — System of measurement selection
5 — Password dialog box
Fig. 4 — User Login Screen
Changing the Touch Pilot Display Language — The User
Login Screen (Fig. 4) offers 2 language selections for the
Touch Pilot Display: English or Spanish. The factory default
language is English. To change the display language, simply
select the language icon on the User Login screen.
1
5
Changing the Units of Measurement — The User Login
Screen (Fig. 4) offers 2 choices for units of measurement: US
Imperial or Metric. The factory default is US Imperial. To
change the measurement system, select the appropriate system
on the User Login screen.
MAIN MENU SCREEN — The Main Menu provides access
to the main control parameters, including general parameters,
temperatures and pressures, inputs and outputs status, and oth-
ers. Press the Main Menu button
access the Main Menu.
Figure 5 shows the first page of the Main Menu. To navi-
gate through the pages, press the arrows at the lower right cor-
ner of the screen.
To view or modify system parameters, press the appropriate
icon on the Main Menu. For example, to access the General Pa-
rameters table, press the General Parameters button
Figure 6 shows the first page of the General Parameters ta-
ble. Use the arrows at the bottom right corner to navigate the
General Parameters table.
Fig. 5 — Main Menu
Fig. 6 — General Parameters, Page 1
Points that can be changed with the current level of user ac-
cess are outlined by a box. For example, to modify the set point
parameter, select the current set point as shown in Fig. 6 and
enter the desired parameter.
The data entry screen will be displayed (Fig. 7). Use the
graphic "keyboard" to modify the parameter, then press OK to
save or EXIT to cancel the modifications.
8
on the Home screen to
.
a30-5914
PRESS TO NAVIGATE
THROUGH MENUS
OR TABLES