Table of Contents
Advertisement
Date - Time: the upper side of the card (identified by Date - Time) is used to update, if necessary,
the instrument date and time; selecting the "Update instrument Date-Time to PC Date-Time" item,
the instrument date and time are automatically updated to the PC date and time.
Sample time: it represents the interval between two subsequent loggings (sampling interval) and
can be chosen in the range between 1 second and 1 hour.
Start Mode: it indicates the mode logging will start: selecting the Manual item, logging will start
when the operator presses the LOG key (or LOGGING key, depending on models) on the instru-
ment. On the contrary, selecting the Start Mode=Date item, the Start Date-Time (delayed start) and
Stop Date-Time boxes (logging delayed stop) will become active: here you can enter logging start
and stop time and date.
Anyhow, in both cases, you can start and stop logging from PC.
Alarms: it manages the alarms of each channel. Selecting the different items, related alarms are en-
abled and you can enter in the dialog boxes the minimum and maximum values, or both of them.
Each channel can be enabled independently of the other.
39
Advertisement
Table of Contents
