Delta HD207 Series Instruction Manual page 27

Close
It closes a File previously opened
Print...
It prints the current report and, more precisely, the data displayed in the "Data View Area" and
in "View Area of Current Report Summary Data", as well as the comment eventually entered by
the user through the Tool/ViewEdit Comments menu.
Printer Setup...
It opens the panel for printer setup setting.
Exit
It closes the program.
B) Instrument Menu
Connect
It connects DeltaLog2 program to the instrument and sets the serial port parameters automati-
cally.
Disconnect
It disconnects DeltaLog2 program from the instrument and enables the use of the serial port for
other programs.
Inst. Info (Information about the instrument)
It opens a window containing the information about the instrument connected to the program.
Read Temp/Hum. (Temperature/Humidity Reading)
It starts the function to view on the PC monitor the measurements detected by the minidatalog-
ger in real time.
Start Recording
It starts data logging on the minidatalogger.
Stop Recording
It stops data logging on the minidatalogger.
27