Table of Contents
Advertisement
Measurement registered by
the two input channels of the
instrument
Diagram of the two channels
The vertical yellow lines rep-
resent the storage interval
activated through the "Store
Data On File" command (see
below).
Alarm current status. The red
LED turns on when the limit
is exceeded. Press the Reset
key to clear it.
Alarm history: it registers all
the alarms occurred since this
window was opened
Select the "Enable Storing"
item to store the measure-
ments registered by the two
channels. If you disable it, or
quit the function, you will be
asked if you want to save data
on a file.
42
Advertisement
Table of Contents
