Table of Contents
Advertisement
Data View in Graph or Table Format
The content of the minidatalogger memory can be viewed in graph or table format. In the window on
the left side (Report List) are shown the groups of data corresponding to the different logging ses-
sions, together with the logging start and stop date and the number of samples. To select a group of
data, you just have to click the name of the report list with the left button of the mouse.
Data View in Table Format
In the table view you find the list of measurements detected by the instrument, provided with date
and time.
A filter can be applied on these data. It extracts from the total of data a subgroup, according to the
value of a high limit, of and a low limit or of the overlay of both of them . The filter can be applied to
one of the two channels or to both of them: in this case, only the groups that respect contemporane-
ously the two conditions will be shown.
After setting a filter using the "Filter Setup..." command, apply it by using the "Filter Apply" com-
mand: a window similar to the next one will be viewed.
44
Advertisement
Table of Contents
