Table of Contents
Advertisement
The instrument is ready to store data at the established time and date.
Note: if the stop date is prior to the start one, the instrument continues storing until memory is
full. Then it stops.
See the other notes of the previous paragraph.
Logging (for HD226... and HD227... models)
Logging operation requires that some parameters, such as sampling interval, storage start/stop time
and date (in case of auto logging) and alarm set-point setting, are previously set: all these opera-
tions are carried out by DeltaLog2 software. See the next paragraph about how to connect the in-
strument to a PC and on how to use the program (see page 23).
Two logging modes are available: manual or auto. Logging start and stop are controlled by the
LOGGING key in the first mode, and by entering time and date in the second one. When logging,
the LOG green LED flashes every 8 seconds to remind the user that the instrument is working.
16
22.9
22.9
Advertisement
Table of Contents
