Instructions; Safety; Installation; Lifting Instructions - ESAB Aristo Mig 3001i Service Manual

INSTRUCTIONS

This chapter is an extract from the instruction manuals for the Mig 3001i and Tig 3001i.

SAFETY

CAUTION!
Read and understand the instruction manual before
installing or operating.

INSTALLATION

Lifting instructions

Location

Position the welding power source such that its cooling air
inlets and outlets are not obstructed.

Mains power supply

Note!
Mains supply requirements
High power equipment may, due to the primary current drawn from the mains supply, influence the
power quality of the grid. Therefore connection restrictions or requirements regarding the
maximum permissible mains impedance or the required minimum supply capacity at the interface
point to the public grid may apply for some types of equipment (see technical data). In this case it
is the responsibility of the installer or user of the equipment to ensure, by consultation with the
distrubution network operator if necessary, that the equipment may be connected.
ca41i1
- 70 -
S0740 800 196/E101019/P76