Install The Hard Disk Drive - KGuard Security HD Series User Manual

Install the Hard Disk Drive

This DVR supports one 3.5" or 2.5" SATA HDD.
CAUTION: DO NOT install or remove the hard disk drive while the device power is turned ON.
Depending on the model you purchased, the actual product may slightly differ from the images below.
NOTE:
a) Connect the data and power cables to the HDD and place the HDD on b) Carefully flip the DVR case and secure the HDD to the DVR with the four (4)
the DVR case. screws.
4/8-Channel DVR 4/8-Channel DVR
16-Channel DVR 16-Channel DVR
Hybrid DVR (HD Series)
5