Table of Contents
Advertisement
First screen you see after going through or skipping the Startup Wizard. On this screen, you see the live views from all connected cameras. The view varies depending on the
DVR model you purchased.
Status Icons
R M
Menu bar
Status Icons
The motion icon indicates that the DVR is detecting motion from the camera.
M
The HDD icon indicates that the DVR cannot detect a HDD or the HDD is not formatted.
H
This indicates that the DVR is currently recording.
R
M
This icon appears when the camera has detected motion and triggers recording.
The PIR icon indicates that the DVR is detecting motion from the PIR sensor camera.
PIR
This icon appears when the PIR camera has detected motion and triggers recording.
PIR
The SM icon indicates that the DVR is detecting smoke from the Smoke detector camera.
SM
This icon appears when the Smoke detector camera has detected smoke and triggers recording.
SM
VIDEO LOSS: Connection to the camera has been lost. / Off-line: The added IP camera is offline or disconnected.
No Camera: IP Camera has not been connected to the DVR.
Live Viewing Screen
A
B
C
D E
F
G
H
Quick Camera
J K L M N O
Toolbar
I
Menu Bar
A)
Click this to open the Main Menu.
B)
Click this to lock the screen.
C)
Click this to switch to different camera views.
D)
Click this to view more layout options.
E)
Click this to switch all channels to mainstream or
substream (for live view resolution).
F)
Click this to switch between realtime, balanced, or
smooth view. The view effect modes influence only
the displayed video quality by bit rate and frame rate
but do not influence the recording quality.
G)
Click this to start viewing channels in a sequence set
"Main Menu > Parameter > Display > Output" on
in
page 11
.
H)
Click this to adjust the volume.
I )
Click this if you want to playback videos.
Quick Camera Toolbar
J )
Click this to manually capture an image.
K)
Click to start recording the channel manually.
L )
Click to review the channel playback of the recent
5 minutes recording.
M)
Click to zoom in the channel.
N)
Click to adjust the channel color settings.
O)
Click to configure the camera PTZ settings.
Hybrid DVR (HD Series)
9
Hide quick links:
Advertisement
Table of Contents
