Main Menu > Parameter > Display > Ip Channels & Image Control - KGuard Security HD Series User Manual

Default user name: admin, default password: 123456
Table of Contents

Advertisement

Main Menu > Parameter > Display > IP Channels & Image Control
This menu allows you to add and modify IP cameras configurations.
This menu allows you to configure the camera settings. Some IP cameras may not support this feature and the IP camera settings cannot also be changed using the DVR.
• Auto Assign IP to Camera(s)
reassign an IP address to the IP camera
that is already connected to the DVR.
• Add
All:
cameras (DVR and IP cameras are
connected to the same router). To
complete the connection, enter user
name and password of the IP camera,
and click
Channel:
Select the channel you want to modify.
• IR-CUT
Mode:
Select the desired built-in filter switch-over
mode to ensure the camera works properly both in the
daylight and night.
• IR-CUT
Delay:
Set the IR-CUT switching time delay.
• Lens Flip/Angle
Flip:
Check to enable automatic lens flip
and/or angle flip.
• Back
Light:
Enable this feature to compensate the darkness
of the subject when shooting against bright light sources.
For example, sunlight.
• 3D Noise
Reduction:
Enable this feature to digitally
minimize video noise and extend the DVR storage.
Level:
Set the noise reduction level.
• WDR (Wide Dynamic
Range):
Enable to allow
automatically adjust the brightness and contrast of the
video when shooting in the darkness with bright light
sources.
:
Click to
• User-defined Add
the Internet.
Click to add local ONVIF
OK.
Enter the connection parameters of the IP camera: IP Address/
Domain, Port, Protocol, User Name, and Password. Then click
Add.
• AGC (Automatic Gain
in changing lightning environments. The video image is
brightened in dark areas.
• White
Auto (automatic adjustment), Manual (manual adjustment
of red and blue gain), indoor (optimized according to the
indoor environment).
Shutter:
• Time
Exposure:
:
Click to add remote ONVIF cameras over
Control):
Configure when shooting
Balance:
Choose the white balance level between
Set the shutter mode.
Choose the exposure time of the camera.
Hybrid DVR (HD Series)
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd481Hd881Hd1681

Table of Contents