Table of Contents
Advertisement
Main Menu > Parameter > Display > Analog Channels & Output
This menu allows you to enable or disable the analog channels.
Main Menu > Parameter > Display > Output
This menu allows you to configure video output parameters.
•
Channel: Display channel identification.
• Channel
Name: Display the channel name.
•
State: Display the channel status.
• Analog
Channel: Click on the checkbox next to the channel identifier to enable or disable the
analog channel.
After making modifications to the channel status, click Save to save the changes. You are
NOTE:
prompted to confirm the modifications. Click OK to confirm.
• Video
Output:
This is the monitor that you use for live view display.
• Seq
Mode: Choose your favorite layout from the drop-down menu for viewing channels in a
sequence on live view.
• SEQ Dwell Time:
Set how long you want the live view from a channel to be displayed in a
sequence.
• VGA/HDMI
Resolution: Select the highest resolution your monitor/TV supports. The higher the
resolution, the more details you will see on your images. The DVR will restart after you change the
resolution.
•
Transparency: Decide how transparent you want the menus to be. Choose partially transparent
(see-through) if you need to keep an eye on happenings while adjusting settings.
• Support
Overscan: Check to allow adjusting the position of the video image on the live viewing
screen.
Hybrid DVR (HD Series)
11
Hide quick links:
Advertisement
Table of Contents
