Table of Contents
Advertisement
Connection Diagram
Front
Hybrid
1)
You can connect to other IP cameras remotely over the Internet.
2)
Connect a CAT.5E or higher RJ45 Ethernet cable for local connectivity.
You can connect to other IP cameras through your local network.
To view the ONVIF IP camera(s), you need to add the camera(s) first via OSD menu.
NOTE:
Please see
"Main Menu > Parameter > Display > IP Channels & Image Control" on page 13
3)
Connect the microphone(s) and/or audio-supported camera(s), if you want to
listen to the audio sound from the cameras.
4)
Connects to a Speed dome camera via RS485.
5)
Use the USB flash disk for backup or system upgrade.
6)
Connect the video output of the DVR to the TV or monitor via HDMI or VGA
connection.
Internet
Router
Rear
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
9
7)
Connect the BNC plug of the camera's extension cable to the Video input
connector on the rear of the DVR.
NOTE:
-Please make sure analog channels are enabled. See
.
Analog Channels & Output" on page
-This DVR supports cameras with UTC function (Nextchip Coaxial Protocol).
8)
Connect speakers if you want to listen to the live audio sound or audio playback from
the DVR.
9)
You need the USB mouse to go through the initial setup menus once the DVR is
powered on.
1
2
Router
3
3
1
LAN
3
1
4
2
4
2
AUDIO
VIDEO
AUDIO
HDMI
VGA
RS485
OUTPUT
INPUT
INPUT
4
5
8
7
6
or
11.
12V
"Main Menu > Parameter > Display >
Hybrid DVR (HD Series)
7
Hide quick links:
Advertisement
Table of Contents
