Table of Contents
Advertisement
Main Menu > Advanced > Maintain/Events/Auto Upgrade
This menu allows you to configure automatic system maintenance, load factory defaults, update the firmware settings, and upgrade the IPC.
• IP Camera Load Defaults:
Reset the IP Camera settings.
• Reboot IP Camera:
Reboot the IP Camera.
This menu allows you to set the type of events that you want the DVR to inform you.
This menu allows you to automatically upgrade the DVR.
Hybrid DVR (HD Series)
36
• Default User:
If you want to log in to the DVR automatically for live view after each startup, then only
administrator user account can be set for auto login.
• Auto Reboot:
Set enable to reboot the DVR based on a schedule.
• Reboot:
Set the rebooting schedule based on day, week, or month.
• Update:
Click to load the update file and then upgrade the firmware.
• Load Settings:
Select this option to import the setting that you have saved earlier, using the Save Settings function.
• Load Default:
Use this feature to restore the factory default settings of the DVR. It is recommended to load
defaults for all options, after upgrading the firmware.
• Save Settings:
Select this option to save the DVR current settings, such as the video recording settings, network
configurations, and etc to the USB device.
• Camera Upgrade:
Click to select the update file and then upgrade the IP camera.
Some IP cameras may not support this feature.
NOTE:
• Event Type:
Select the event type. Options are:
-
Disk
Full:
When HDD is full.
-
Disk Error: If HDD is not detected properly.
- Video Loss: If camera is not detected properly.
• Enable:
Check the box to enable the monitoring of the event.
• Show Message:
Check the box to display a message on the screen when Disk Full, Disk Error, or Video Loss
event happens.
• Send Email:
Let the DVR to send you an auto-email when an event occurs. To set up the email and schedule,
please see
"Main Menu > Parameter > Network > Email & Email Schedule" on page
• Buzzer:
Set the buzzer duration when the event occurs (Off/10 S/20 S/40 S/60 S). To disable buzzer, select OFF.
• Auto Upgrade:
Enable to allow automatic upgrading.
• Check For updates:
Check the box to allow the system automatically check for updates.
• Detect:
Click to detect the software version.
• Upgrade:
Click to start upgrading.
23.
Hide quick links:
Advertisement
Table of Contents
