Chapter 5: Kguard Web Client; Login - KGuard Security TC801 User Manual

Chapter 5: KGUARD Web Client

Chapter 5: KGUARD Web Client
Use KGUARD Web Client to remotely access the DVR anytime.
To access KGUARD Web Client you must ensure the following requirements are met:
• The Network settings of the DVR is properly configured. See
• Your computer has a web browser, such as Internet Explorer, installed.

5.1 Login

KGUARD Web Client allows up to 3 simultaneous access. However, only one administrator account is allowed per
access.
1
Open your computer web browser and enter the DVR IP address or domain name in the URL box.
For example, see illustration below:
Don't know the IP Address of your DVR?
The IP address of the DVR vary depending on the network settings you configured in NETWORK menu (see
Setting the Network" on page
• If your network type is DHCP, ask your network administrator for the IP address assigned to the DVR.
• If your network type is PPPoE, ask your Internet Service Provider (ISP) for the IP address assigned to the DVR.
• If your network type is Static IP, check the IP address you configured for IP ADDR in NETWORK menu.
• If the DVR is connected to a DDNS, check the Domain Name that you configured when you created the DDNS
account and type the domain name in the URL box.
2
Enter the User Name and Password.
Note:
The default administrator User Name is "admin" and the password is empty. To change the password, see
"Changing the Password" on page
3
If necessary, select the type of network connection in Network (Internet or LAN).
4
Click Login.
DVR User's Manual
58
34).
50.
"4.2 Setting the Network" on page 34.
"4.2