Attaching The Bumper Bar - mothercare Xtreme User Manual

fig 7b
preparation for use
4
fitting the rear wheels
fig 8
pumping up the tyres
The tyre pump is secured in the shopping basket. The three-wheeler's tyres are supplied only partially
inflated. Inflate tyres until firm. Do not over inflate them.

attaching the bumper bar

fig 9
fig 7c
With the quick release lever open,
tighten in a clockwise direction
untill wheel is secure. Rotate the
lever from the open position to the
close firmly lock wheel in place.
Insert the spindle on each wheel into the
wheel joint. When fully in, pull gently on each
wheel to check that they are secure.
Insert the ends of the bumper bar into the
armrests. Check the bumper bar is securely
in place by pulling it.
To remove, press the release clips
(underneath the armrests) on both sides and
pull out.
© Mothercare UK Ltd. 2010