Care Of Your Product - mothercare Xtreme User Manual

Care of your product

• Your pushchair requires maintenance by you.
• Regularly inspect the locks, brakes, harness, catches, seat adjusters, joints
and fixings to ensure they are secure and in full working order.
• Brakes, wheels and tyres do wear and should be replaced if necessary.
This can be arranged through your local Mothercare store.
• If parts become stiff of difficult to operate, ensure dirt is not the cause, then
try a light application of a silicon lubricant, ensuring it penetrates between
the components. Regular lubrication of moving parts will extend the life of
your pushchair and make opening and folding easier.
• Plastic and metal parts may be sponged lightly using warm water and a
mild detergent. dry thoroughly before storing.
• Refer to sewn in labels for fabric care instructions.
• Never clean with abrasive, ammonia based, bleach based or spirit type
cleaners.
• After exposure to damp conditions, dry off with a soft cloth and leave fully
open in a warm environment. Storing damp will encourage mildew to form.
• Store in a dry place
• Do not leave in sunlight for prolonged periods - some fabrics may fade.
• Your pushchair should be serviced and reconditioned before using it for a
second baby, or within 18 months, whichever is the sooner. This can be
arranged by your local Mothercare store.
• The Weathershield™ can be cleaned by sponging with warm water and a
mild detergent.
• Never clean with abrasive, ammonia based, bleach based or spirit type
cleaners.
• Never store this cover where heat may distort the Weathershield™.
• Make sure that the pressure of all the tyres is correct. This means that the
pushchair will ride more easily and prevents damage to turning and hinged
parts.
• Inflate rear tyres to a maximum pressure of 26PSI (1.8Bar). The tyres are
equipped with a 'Car type valve' and can be inflated using the pump provided.
© Mothercare UK Ltd. 2010