Advertisement
February 2019
2
Transmitter installation
2.1
Mount the transmitter
2.1.1 Liquid applications
Procedure
1. Place taps to the side of the line.
2. Mount beside or below the taps.
3. Mount the transmitter so that the drain/vent valves are oriented
upward.
Figure 2-1: Coplanar and In-line Liquid Applications
2.1.2 Gas applications
Procedure
1. Place taps in the top or side of the line.
2. Mount beside or above the taps.
Quick Start Guide
A. Coplanar
B. In-line
Quick Start Guide
5
Advertisement
