Advertisement
February 2019
1. The Rosemount 3051 transmitter housing contains aluminum and is
considered a potential risk of ignition by impact or friction. Care must
be taken into account during installation and use to prevent impact
and friction.
2. The Rosemount 3051 transmitter with the transient terminal block
(option code T1) will not pass the 500 Vrms dielectric strength test
and this must be taken into account during installation.
C6 Canada Explosionproof, Dust-Ignitionproof, Intrinsic Safety and
Nonincendive
Certificate 1053834
Standards ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No. 30 -M1986, CSA
Markings
E6 Canada Explosionproof, Dust-Ignitionproof, and Division 2
Certificate 1053834
Standards ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No. 30 -M1986, CSA
Markings
Europe
E8 ATEX Flameproof and Dust
Certificate KEMA97ATEX2378X; BAS01ATEX1427X
Standards EN60079-0:2012 + A11:2013, EN60079-1:2013,
Quick Start Guide
Std. C22.2 No.142-M1987, CSA Std. C22.2. No.157-92, CSA
Std. C22.2 No. 213 - M1987
Explosionproof for Class I, Division 1, Groups B, C and D;
Suitable for Class I, Zone 1, Group IIB+H2, T5; Dust-
Ignitionproof Class II, Division 1, Groups E, F, G; Class III Division
1; Intrinsically Safe Class I, Division 1 Groups A, B, C, D when
connected in accordance with Rosemount drawing
03031-1024, Temperature Code T3C; Suitable for Class I, Zone
0; Class I Division 2 Groups A, B, C and D, T5; Suitable for Class I
Zone 2, Group IIC; Type 4X; Factory Sealed; Single Seal (See
drawing 03031-1053)
Std. C22.2 No.142-M1987, CSA Std. C22.2 No. 213 - M1987
Explosionproof Class I, Division 1, Groups B, C and D; Suitable
for Class I, Zone 1, Group IIB+H2, T5; Dust-Ignitionproof for
Class II and Class III, Division 1, Groups E, F and G; Class I,
Division 2, Groups A, B, C and D; Suitable for Class I Zone 2,
Group IIC; Type 4X; Factory Sealed; Single Seal (See drawing
03031-1053)
EN60079-26:2015, EN60079-31:2009
Quick Start Guide
27
Advertisement
