Emerson Rosemount 3051D Quick Start Manual page 17

February 2019
Table 2-3: LOI Button Operation
Button
Left
Right
Figure 2-12: LOI Menu
2.4.3 Switch HART revision mode
If the HART configuration tool is not capable of communicating with HART
Revision 7, the Rosemount 3051 will load a generic menu with limited
capability. The following procedures will switch the HART revision mode from
the generic menu:
Procedure
Manual Setup>Device Information>Identification>Message
a) To change to HART Revision 5, Enter: "HART5" in the Message field
b) To change to HART Revision 7, Enter: "HART7" in the Message field
Quick Start Guide
No
Yes
Quick Start Guide
SCROLL
ENTER
Assign PV
HART Revision
17