Getting Started - TANDBERG C90 System Integrator Manual

Codec C90
Contents Introduction

Getting Started

Contents Introduction Getting started Getting started
This chapter introduces you to the codec
and gets you up and going.
This guide has been divided into several
chapters, all of which provide different
information. You can access the chapters
directly by clicking on the menu bar at the
top of this page.
D14128.03—JULY 2009
Interfaces About the API xConfiguration xConfiguration
Interfaces About the API
Chapter 2
Getting started
xCommand xStatus Cameras
xCommand xStatus Cameras
System Integrator Guide
Appendices Contact us
Appendices Contact us
In this chapter...
Assemble your system
Using the remote control
Initial configurations
Waking up the system
Verify IP address settings
Setting a static IP address
Add the system to the network
Verify your settings
Date and time settings
Menu password
About monitors
The main monitor
Dual monitors
8