TANDBERG C90 System Integrator Manual page 48

Codec C90
Contents Introduction Getting Started
Contents Introduction Getting started
About xFeedback
The xFeedback command is used to specify what parts of the
configuration and status hierarchies to monitor.
The xFeedback command will only be issued on the RS-232/Telnet/
SSH for which it is specified.
If connecting to the TANDBERG codec with multiple RS-232/Telnet/
SSH sessions, each session can define feedback individually.
D14128.03—JULY 2009
Interfaces About the API xConfiguration xConfiguration
Interfaces About the API About the API
xFeedback ?
xFeedback help:
xFeedback Register XPathExpression
xFeedback Deregister XPathExpression
xFeedback List
xFeedback Help
xCommand xStatus Cameras
xCommand xStatus Cameras
- Registers feedback on expression XPathExpression
- Deregisters feedback if resistered on XPathExpression
- Generate list of currently registered XPathExpressions
- Display this help text
System Integrator Guide
Appendices Contact us
Appendices Contact us
48