TANDBERG C90 System Integrator Manual page 11

Codec C90
Contents Introduction Getting Started
Contents Introduction Getting started Getting started
Using the Remote
Control,
cont...
The functions keys
in the upper part of
the remote control
reflects the soft keys
on screen.
... and the middle
part of the remote
control is used to
handle the video
part of the call.
... while the lower
part of the remote
control resembles
very much the
keypad of a mobile
phone
D14128.03—JULY 2009
Interfaces About the API
Interfaces About the API
CALL KEY
INITIATE CALL: Select a name from the Phone book or enter the
name, number or URI and press the Call key to initiate the call.
SHORTCUT TO RECENT CALLS: Use the Call button as a
shortcut to Recent Calls when the Call menu is not visible.
CLEAR: Press the Cancel
key to remove characters
in a text field.
Waking up the system
Press any key on the remote control to wake up the system.
Press the HOME
key to show the
menu on screen
Touch the rubber
line sensors along
the sides to wake
up the system
xConfiguration xConfiguration xCommand
xCommand xStatus
ALPHANUMERIC KEYPAD
Use the keypad in the same way as you would
use a cellular phone.
END CALL, STANDBY:
Press the End Call
key to end a call, or
when idle, press and
hold the key to go into
standby mode.
IR sensor range (DIP switch setting)
The IR sensor has a short and long range. Open the battery cover and remove
the batteries to set the DIP switch.
• Short range (1 m): Move the DIP switch down
• Long range: Move the DIP switch up.
System Integrator Guide
xStatus Cameras Appendices
Cameras Appendices
0-9, a-z, period (.), @, space, *:
Press a key repeatedly to toggle
between the options displayed
on each key.
abc/123 #:
toggle between lower case
characters and numbers.
The DIP
switch
Contact us
Contact us
Press the # key to
11