Assemble Your System - TANDBERG C90 System Integrator Manual

Codec C90
Contents Introduction Getting Started
Contents Introduction Getting started Getting started
1

Assemble your system

The illustration shows you the basic setup when connecting your monitor, PC,
camera, microphone, loudspeakers (if applicable), LAN and line voltage to your
codec.
Monitor
(Audio from HDMI 1 or
Line Out 1–2)
OPTIONAL:
Dual monitor setup
Connect the second
monitor to HDMI 3
Make sure the codec has been switched off and
! disconnected from the line voltage whenever
connecting or disconnecting other equipment.
D14128.03—JULY 2009
Interfaces About the API xConfiguration xConfiguration
Interfaces About the API
Video
from PC
Main camera:
Video from
PrecisionHD 1080p
Main camera:
Camera Control to
PrecisionHD 1080p
xCommand xStatus
xCommand xStatus
OPTIONAL:
Audio from PC
Microphone OPTIONAL:
You may connect additional
microphones
OPTIONAL:
You may connect a second camera.
(extra camera not included). Extra camera will
require separate power supply and control
cabling. Consult the documentation supplied
with the extra camera for details.
System Integrator Guide
Cameras Appendices Contact us
Cameras Appendices Contact us
OPTIONAL:
Loudspeakers
LAN/
Ethernet
Mains Power
Cable
9