Getting Started - TANDBERG C20 Administrator's Manual

Quick Set C20/C20plus
Contents Introduction
Contents Introduction
This chapter introduces you to the
codec, the remote control and the initial
configurations to get you up and going.
This guide has been divided into several
chapters, all of which provide different
information. You can access the chapters
directly by clicking on the menu bar at the
top of this page.
D14489.01—JULY 2009
Getting started About the menus

Getting started

Getting started About the menus
Getting started
Advanced settings Settings library
Advanced settings Settings Library
Chapter 2
Administrator Guide
Cameras Appendices
Cameras Appendices
In this chapter...
Explains the menu system:
Assemble the system
The physical interface
Using the remote control
Initial configurations
Waking up the system
The IP address settings
Static IP address settings
Add the system to the network
Verify your settings
Adjust the time and date settings
Setting a menu password
Connecting the monitor
About monitors
Contact us
Contact us
8