TANDBERG C90 System Integrator Manual page 94

Codec C90
Contents Introduction Getting Started
Contents Introduction Getting started
The Audio status,
cont...
xStatus Audio Module [1..n] Connector
States which output connector the audio module with the given ID is attached to.
Value space: <Line_out.1/3>
Example:
xStatus Audio Module 1 Connector
*s Audio Module 1 Connector: "Line_out.1"
** end
D14128.03—JULY 2009
Interfaces About the API xConfiguration xConfiguration
Interfaces About the API
xCommand xStatus
xCommand xStatus xStatus
The Call status
xStatus Call
Run this command to see an overview of the call status. The call id can be used later when query for
additional information about the call.
Example:
xStatus Call
*s Call 27 Status: Connected
*s Call 27 Direction: Outgoing
*s Call 27 Protocol: "sip"
*s Call 27 RemoteNumber: "john.doe@company.com"
*s Call 27 CallbackNumber: "sip:john.doe@company.com"
*s Call 27 DisplayName: "john.doe"
*s Call 27 CallRate: 968
*s Call 27 TransmitCallRate: 768
*s Call 27 ReceiveCallRate: 968
*s Call 27 Encryption Type: "None"
*s Call 27 PlacedOnHold: False
** end
xStatus Call [1..n] Status
Status of a call.
Value space: <Dialling/Connecting/Ringing/Connected/Idle>
Example:
xStatus Call 27 Status
*s Call 28 Status: Connected
** end
xStatus Call [1..n] Direction
Direction of the call initiation.
Value space: <Incoming/Outgoing>
Example:
xStatus Call 28 Direction
*s Call 28 Direction: Outgoing
** end
System Integrator Guide
Cameras Appendices Contact us
Cameras Appendices Contact us
94