TANDBERG C90 System Integrator Manual page 92

Codec C90
Contents Introduction Getting Started
Contents Introduction Getting started
The Audio status,
cont...
xStatus Audio Input LocalInput [1..n] Mute
States whether the local input with the given input ID is muted.
Value space: <On/Off>
Example:
xStatus Audio Input LocalInput 46 Mute
*s Audio Input LocalInput 46 Mute: "Off"
** end
xStatus Audio Input LocalInput [1..n] Channels
States whether the local input mixes the input connectors into a mono signal or a stereo signal.
Value space: <1..2>
Example:
xStatus Audio Input LocalInput 46 Channels
*s Audio Input LocalInput 46 Channels: 1
** end
xStatus Audio Input LocalInput [1..n] AGC
States whether Automatic Gain Control is enabled on the signal from this local input.
Value space: <On/Off>
Example:
xStatus Audio Input LocalInput 46 AGC
*s Audio Input LocalInput 46 AGC: "On"
** end
xStatus Audio Input LocalInput [1..n] Connector
States the connectors mixed together in the local input with the given input ID.
Value space: <Microphone/Line/HDMI.1..8>
Example:
xStatus Audio Input LocalInput 46 Connector
*s Audio Input LocalInput 46 Connector: "Microphone.1"
** end
D14128.03—JULY 2009
Interfaces About the API xConfiguration xConfiguration
Interfaces About the API
xCommand xStatus
xCommand xStatus xStatus
The Audio status,
cont...
xStatus Audio Input RemoteInput [1..n] CallId
States which CallId the remote input with the given input ID belongs to.
Value space: <Integer value>
Example:
xStatus Audio Input RemoteInput 51 CallId
*s Audio Input RemoteInput 51 CallId: 28
** end
xStatus Audio Input RemoteInput [1..n] AGC
States whether Automatic Gain Control is enabled on the signal from this remote input.
Value space: <On/Off>
Example:
xStatus Audio Input RemoteInput 51 AGC
*s Audio Input RemoteInput 51 AGC: "Off
** end
xStatus Audio Output LocalOutput [1..n] Name
States the name of the local output with the given output ID.
Value space: <S: 0,.255>
Example:
xStatus Audio Output LocalOutput 48 Name
*s Audio Output LocalOutput 48 Name: "MyLocalOutput1"
** end
xStatus Audio Output LocalOutput [1..n] Loudspeaker
States whether Loudspeaker is enabled on the local output with the given output ID. If one or more of the
output connectors attached to this local output are connected to a loudspeaker, this signal should be a
reference signal to the echo canceller and Loudspeaker should be set to On.
Value space: <On/Off>
Example:
xStatus Audio Output LocalOutput 48 Loudspeaker
*s Audio Output LocalOutput 48 Loudspeaker: "Off"
** end
System Integrator Guide
Cameras Appendices Contact us
Cameras Appendices Contact us
92