TANDBERG C90 System Integrator Manual page 25

Codec C90
Contents Introduction Getting Started
Contents Introduction Getting started
Audio outputs (I)
Line Out 5–6 (XLR)
2xBalanced XLR sockets, audio output 5–6.
Audio Line Out 5–6 are balanced outputs, for
connection to balanced speakers.
Default configuration. In default configuration
Line Out 5 is configured as Left speaker, and Line
Out 6 is configured as right speaker.
HDMI Out 1, 3
2xHDMI connectors, audio out 1, 3
Use HDMI Out 1 to connect to a flatscreen with
speakers. HDMI 1 will provide stereo audio speaker
signals at 48kHz.
Use HDMI Out 3 to connect to a DVD recorder.
HDMI will provide stereo line output signals at
48kHz. Includes local microphones.
Main connector. The HDMI output 1 is the main
connector to the monitor.
HDMI 1. Audio from far end and PC.
HDMI 3. All audio mixed together for recordings.
D14128.03—JULY 2009
Interfaces About the API
Interfaces Interfaces About the API
2xHDMI Out
XLR pin-out
External view of socket
Pin 1: Gnd
2 1
Pin 2: Hot
Pin 3: Cold/neutral
3
XLR - Electrical Connector (Cannon XL series with
Rubber compound)
xConfiguration xConfiguration xCommand
xCommand xStatus
2xLine Out (XLR male)
What is a Line output
A Line output consists of all signals from local
side and all signals from far end side.
What is a Speaker output
A Speaker output consists of all signals from
local side, except microphones, and all signals
from far end side.
System Integrator Guide
xStatus Cameras Appendices
Cameras Appendices
Left channel
The Left channel consists of all Left channel and
Mono signals.
Right channel
The Right channel consists of all Right channel
and Mono signals.
Contact us
Contact us
25