Export from PAA to PCS 7
17.12 Exporting ET 200PA SMART modules from PAA to PCS 7
17.11
Exporting ET 200SP modules from PAA to PCS 7
Procedure
1. In the menu bar, select the "Plugins > Automation > PCS 7 interface > Import / Export
PCS 7" command.
2. Select the "Export" tab.
See also chapter Exporting a PAA project (Page 167).
Note
It is not necessary to create base units to transfer a project with ET 200SP from PAA to PCS 7.
17.12
Exporting ET 200PA SMART modules from PAA to PCS 7
Procedure
1. In the menu bar, select the "Plugins > Automation > PCS 7 interface > Import / Export
PCS 7" command.
2. Select the "Export" tab.
See also chapter Exporting a PAA project (Page 167).
Note
It is not necessary to create bus and terminal modules to transfer a project with ET 200PA
SMART from PAA to PCS 7.
172
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA