Import from PCS 7 to PAA
18.17 Importing ET 200iSP from PCS 7
Result
The hardware is imported to the current PAA project and the new physical structure is created
including the bus modules and profile rail.
18.17
Importing ET 200iSP from PCS 7
Requirements
The PCS 7 project with ET 200iSP is created.
The following configurations are possible:
● ET 200iSP with single PROFIBUS interface module
● ET 200iSP with redundant PROFIBUS interface module
Procedure
1. In the menu bar, select the "Plugins > Automation > PCS 7 interface > Import / Export
PCS 7" command.
2. Select the "Import" tab.
See also chapter Importing the hardware configuration (Page 182).
Result
The hardware is imported to the current PAA project and the new physical structure is created
including the bus modules, terminal modules and profile rail.
186
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA