Linking attributes from PAA and PCS 7
16.1 Configuring the mapping table of the signal designations
3. Drag&drop this attribute from the Navigator into the "Attribute" column.
4. For each attribute used, double-click in the "Link type" column and select the "Full dynamic"
list entry.
The "Full dynamic" option ensures that all properties of the linked attribute are synchronized.
Step 2: Assigning PAA attributes
1. Keep the mapping table open.
2. Select a process tag below the same position as in the previous step.
A link exists through the unit pointer.
An example of an assignment is available in chapter Example of an assignment (Page 162).
3. Drag&drop this attribute from the Navigator into the "Source object" column.
4. Double-click in the "Property" column and select "DisplayValue" to display the value.
5. Check the transferred property in the "Value" column.
6. To store the assignments, click the "Apply" button.
Optional: Assigning PAA attributes using the navigation assistant
Alternatively, you can select the source object in the navigation assistant.
See chapter Using the navigation assistant (Page 161).
160
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA