Configuring As Bundle Using Hw Configuration Tool - Siemens SIMATIC PCS 7 Operating Manual

Engineering in PAA
14.9 Hardware engineering with the configuration tool
● Do all the required I/O configuration in the "I/O configuration" area depending on the I/O to
be configured.
Note
A module can only be selected once.
– Common I/O settings
– Standard I/O settings
– Failsafe settings
● Click on the "Create" button.
After the slave is created a message with the amount of created stations or errors or
warnings are shown in the status window at the bottom.
Note
● If the "Create" button is pressed a second time a new station is created.
● WS Bundle and PCS 7 Box has online configurator and overview page opens in Industry
● WS Bundle or PCS 7 Box can be re-configured after creating in the tool by the menu in
Result
The configured I/O modules are created under the selected target object.
14.9.2

Configuring AS Bundle using HW configuration tool

Requirement
The configuration tool is open. See also chapter HW configuration tool (Page 120).
122
Mall and therefore internet connection is required.
the tree structure.
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA