How To Order; Ordering Form; Drive Configurator - Danfoss VLT AQUA Drive FC 202 Design Manual

®

How to Order

VLT AQUA Drive FC 202 Design Guide
4 How to Order

4.1 Ordering Form

4.1.1 Drive Configurator

®
It is possible to design a VLT AQUA Drive FC 202 frequency converter according to the application requirements by using
4 4
the ordering number system.
To order standard frequency converters and frequency converters with integral options, send a type code string describing
the product to the Danfoss sales office. An example type code:
FC-202N132T4E21H2XGCXXXSXXXXAXBKCXXXXDX
The meaning of the characters in the string can be located in the pages containing the ordering numbers in 4.1 Ordering
Form. In the example above, a Profibus LON works option and a General purpose I/O option is included in the frequency
converter.
Ordering numbers for VLT AQUA Drive standard variants can also be located in the chapter 4.2 Ordering Numbers.
Use the web-based Drive Configurator, to configure the right frequency converter for the right application and generate the
type code string. The Drive Configurator automatically generates an eight-digit sales number for the local sales office.
Furthermore,it´s possible to establish a project list with several products and send it to a Danfoss sales representative.
The Drive Configurator can be found on the global internet site: www.danfoss.com/drives.
NOTE
Type code information includes frame sizes A, B and C. For detailed information on these products, reference the relevant
design guide.
®
72 MG20Z102 - VLT is a registered Danfoss trademark