Danfoss VLT AQUA Drive FC 202 Design Manual page 132

How to Install
NOTE
Power connections can be made to positions A or B
Frame size
E2
Table 5.16 Power Connections
NOTE
5 5
The F-Frames have four different sizes, F1, F2, F3 and F4. The F1 and F2 consist of an inverter cabinet on the right and
rectifier cabinet on the left. The F3 and F4 have an additional options cabinet to the left of the rectifier cabinet. The F3 is an
F1 with an additional options cabinet. The F4 is an F2 with an additional options cabinet.
Terminal locations - Frame size F1 and F3
Illustration 5.83 Terminal Locations - Inverter Cabinet - F1 and F3 (Front, Left and Right Side View). The Gland Plate is 42 mm below .0
level.
1) Earth ground bar
2) Motor terminals
3) Brake terminals
130
VLT
Unit type
IP00/CHASSIS
250/315kW (400 V) and
355/450-500/630 KW (690 V)
315/355-400/450 kW (400 V)
1
2
MG20Z102 - VLT
®
AQUA Drive FC 202 Design Guide
Dimension for disconnect terminal
A B
381 (15.0) 245 (9.6) 334 (13.1)
383 (15.1) 244 (9.6) 334 (13.1)
3
®
is a registered Danfoss trademark
C D E
423 (16.7) 256 (10.1)
424 (16.7) 109 (4.3)
3
308.3 [12.1]
253.1 [10.0]
180.3 [7.1]
.0 [.0]
44.40 [1.75]
244.40 [9.62]
2
3
F
N/A
149 (5.8)