Repairs
12.2.3
Plate valves
42
6.
If available: Place the compression spring inside the valve
body (2).
7.
Insert the valve ball (3 and the valve seat (4).
8.
Screw on the valve cap (5).
Pay attention to the flow direction of the discharge and
suction connectors when fitting the valve.
P_MAK_0054_SW
Fig. 21: Cross-section through the single ball valve
1
Seal
2
Valve body
3
Valve ball
4
Valve seat
5
Valve cap
Do not scratch the finely machined sealing surfaces on
the valve plates (5) and valve inserts (6).
1
2
3
4
5