During Use - ProMinent Makro/ 5 Operating Instructions Manual

Diaphragm metering pump
Table of Contents

Advertisement

10

During use

WARNING!
Warning about personal and material damage
EX pumps only: When operating in EX areas, certain
subjects must be observed.
The chapter "Important supplements for metering
pumps in EX zones" of the "General Operating
Instructions on ProMinent
Pumps and Hydraulic Accessories" must be
observed in all cases.
WARNING!
Personnel injury and material damage may occur
During use all units, protective equipment, additional
devices must be fitted, operational and tightly closed.
WARNING!
Hot surface
In event the power end motor is loaded excessively, its
surface may become very hot.
Avoid contact.
If necessary, mount a guard plate.
WARNING!
Sparking caused by dry running
If the bearings in the power end run dry, sparks can be
formed.
Check for oil leaks.
When the pump is idle, the pump oil level must
slightly cover the lower oil inspection window.
Observe the instructions in the "Start up" chapter and
the operating instructions for the other machine com‐
ponents.
During use
®
Motor-Driven Metering
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

M5ma

Table of Contents