Assembly - ProMinent Makro/ 5 Operating Instructions Manual

7

Assembly

Safety notes
WARNING!
Warning about personal and material damage
EX pumps only: When operating in EX areas, certain
subjects must be observed.
– The chapter "Important supplements for metering
pumps in EX zones" of the "General Operating
Instructions on ProMinent
Pumps and Hydraulic Accessories" must be
observed in all cases.
CAUTION!
Warning about personal and material damage
Also observe the "General Operating Instructions for
ProMinent ® Motor-Driven Metering Pumps and
Hydraulic Accessories"!
CAUTION!
Danger of environmental and material damage
The unit can be damaged or oil may escape due to
incorrect or improper storage or transportation!
– The unit should only be stored or transported in a
well packaged state - preferably in its original
packaging.
– Only transport the unit with the locking screw - not
the bleed plug - fitted to the oil filling opening.
– The packaged unit should also only be stored or
transported in accordance with the stipulated
storage conditions.
– The packaged unit should be protected from mois‐
ture and the ingress of chemicals.
CAUTION!
Warning about personal and material damage
Personal and material damage may be caused if the
unit is operated outside of the permissible ambient
conditions.
– Please observe the permissible ambient conditions
- refer to the chapter entitled "Technical Data".
Assembly
® Motor-Driven Metering
21